Clutch pedal extension 20mm NCEC Miata/MX-5
*Please use the genuine pedal rubbers.
Clutch pedal extension for NCEC Miata/MX-5.
The driving position can be improved by moving the pedals about 20mm closer to the driver than the genuine one.
Amount of Correction
By installing between the clutch pedal lever and the pedal rubber on the vehicle side, the pedal can be brought to the driver side by 20mm.
Installation
Cover the pedal rubber in advance, insert it sideways into the clutch pedal lever, and slide it on.To prevent it from falling off, screw an M4 x 10mm screw into the screw hole of the extension body to fix it.
Screw
Use M4x10mm screw to prevent falling off.
Clutch pedal extension for Mazda NC Miata/MX-5
By inserting it between the clutch lever and the pedal cover, the pedal moves from the genuine position to 20mm closer to the driver.
Since the angle of the ankle becomes loose, the fatigue of the foot when driving on street roads.
Fine adjustment of the driving position is possible. (Improvement of symptoms such as the clutch being far away when matching the brake)
It facilitates delicate clutch operation such as starting dashes and hand brake turns in sports driving.
The material uses MJF method PA12GB to ensure high strength and heat durability.
Also, since it is made very lightweight, there is no adverse effect on the clutch feeling.
<Wearing method>
1. Remove the genuine pedal cover.
2. Attach the pedal rubber to the pedal lifter in advance. (Put it on while gouging it with a thin flathead screwdriver, etc.)
3. Insert the lifter into the pedal lever from the side, and screw in the set screw to fix it. (It is recommended to use a screw lock agent together.)
*Although we have conducted sufficient tests, we are not responsible for accidents caused by improper installation.
*Be careful not to over-tighten the screws. Over-tightening will damage the plastic parts.
*Specifications are subject to change without notice for product improvement.
